[Plugin] Swiper_XH

Ein CMSimple Support Forum für deutsch sprechende Nutzer und Entwickler
doczimut
Posts: 126
Joined: Thu Dec 25, 2008 1:10 pm
Location: Normandy (France)

Re: [Plugin] Swiper_XH

Post by doczimut » Sun Oct 03, 2021 6:35 pm

Hello
I downloaded version 1.0 RC1. This does not work (on display: page not found) with the test files.
It is used with the one-page plugin.
And in the Swiper check I have:
CMSimple_XH 1.7.4 → I hope it is still supported. It was designed for 1.7.0 - 1.7.2.
An idea ?

olape
Posts: 2731
Joined: Fri Mar 13, 2015 8:47 am
Contact:

Re: [Plugin] Swiper_XH

Post by olape » Sun Oct 03, 2021 7:59 pm

doczimut wrote:
Sun Oct 03, 2021 6:35 pm
CMSimple_XH 1.7.4 → I hope it is still supported. It was designed for 1.7.0 - 1.7.2.
Swiper_XH also works with 1.7.3 and 1.7.4.

doczimut wrote:
Sun Oct 03, 2021 6:35 pm
I downloaded version 1.0 RC1. This does not work (on display: page not found) with the test files.
The respective pages must also be created for the included sets. Like here.
https://swiper-xh.penschke.net/?Verborgenes
But normally these pages are hidden.
doczimut wrote:
Sun Oct 03, 2021 6:35 pm
It is used with the one-page plugin.
Whether this works with a onepager I can not say
Gruß Olaf, Plugins for CMSimple_XH

Ich habe schon lange den Verdacht, dass so viele so eifrig auf Gender, Trans und Queer machen:
Weil sie für das Fachliche ganz einfach zu doof sind.

frase
Posts: 5085
Joined: Thu Apr 21, 2016 6:32 am
Location: Saxony
Contact:

Re: [Plugin] Swiper_XH

Post by frase » Mon Oct 04, 2021 7:18 am

olape wrote:
Sun Oct 03, 2021 7:59 pm
Whether this works with a onepager I can not say
In my experience, Swiper works with the Onepage plugin without any problems. (http://fhs.bplaced.net/fhs-sectionsOP/)

Reminder:
Hidden subpages are always used as swiper pages (for standard swipers).
For swiper sets, the pages to be used must be explicitly specified in the set in include.php.

doczimut
Posts: 126
Joined: Thu Dec 25, 2008 1:10 pm
Location: Normandy (France)

Re: [Plugin] Swiper_XH

Post by doczimut » Mon Oct 04, 2021 7:22 am

I had looked at the instructions carefully before writing.
I tried without the one-page plugin, same result.
On the other hand I had tried with "set_gallery" uncompressed => nothing.
So I tried with "set_fade" => I have the images, for the labels (Fade 01, Fade 02, Fade 03) => page not found, and $ sw_gallery = 'true'; in include.php => page not found.

frase
Posts: 5085
Joined: Thu Apr 21, 2016 6:32 am
Location: Saxony
Contact:

Re: [Plugin] Swiper_XH

Post by frase » Mon Oct 04, 2021 7:30 am

Example "set_fade"
see here: https://swiper-xh.penschke.net/?Verborgenes/fade
Of course you have to create the pages 'fade01', 'fade02' and 'fade03' yourself in your page tree - the plugin can't do that for you automatically.

doczimut
Posts: 126
Joined: Thu Dec 25, 2008 1:10 pm
Location: Normandy (France)

Re: [Plugin] Swiper_XH

Post by doczimut » Mon Oct 04, 2021 7:44 am

I do not understand ?
How to create this tree structure. The standard "set_fade" pattern should work, since this is an example.

doczimut
Posts: 126
Joined: Thu Dec 25, 2008 1:10 pm
Location: Normandy (France)

Re: [Plugin] Swiper_XH

Post by doczimut » Mon Oct 04, 2021 7:56 am

Understood ! Too bad that for the captions of the photos one must use "pagemanager".

frase
Posts: 5085
Joined: Thu Apr 21, 2016 6:32 am
Location: Saxony
Contact:

Re: [Plugin] Swiper_XH

Post by frase » Mon Oct 04, 2021 8:12 am

doczimut wrote:
Mon Oct 04, 2021 7:56 am
Too bad that for the captions of the photos one must use "pagemanager".
So, I don't think this is so bad.
Please keep in mind that depending on the type of swiper, an entire page content can be placed over the animations* this way. It doesn't have to be just captions.
And such content has to be entered somewhere - it's best done on a normal page with the editor.

Once you understand the principle, you can do really nice things with it.

* Correction:
An entire page content can be used as a swiper.

Tata
Posts: 3586
Joined: Tue May 20, 2008 5:34 am
Location: Slovakia
Contact:

Re: [Plugin] Swiper_XH

Post by Tata » Mon Oct 04, 2021 9:15 am

@doczimut
Have a look here or deeper at the first project.
The content tree is for PROJECTS
Screenshot 2021-10-04 at 11-08-27 NINTH SPACE – Page administration.png
for particular Projets then
Screenshot 2021-10-04 at 11-08-27 NINTH SPACE – Page administration.png
I have not tested it with onepage, but I am also sure that it must work just the same way.
The Pages with "_" are the Sliderspages for PROJECTS. The same are the hidden pages in each published project. IOW, the swiper can be used on any level and even on subpages which have the swiper on "parent pages". See, there is a swiper on PROJECTS and on e.g. HCK, Mihyar etc.
You do not have the required permissions to view the files attached to this post.
CMSimple.sk
It's no shame to ask for an answer if all efforts failed.
But it's awful to ask without any effort to find the answer yourself.

lck
Posts: 2963
Joined: Wed Mar 23, 2011 11:43 am
Contact:

Re: [Plugin] Swiper_XH

Post by lck » Wed Oct 27, 2021 5:25 pm

Swiper_XH wirft unter PHP 8.0.9 eine Fehlermeldung (auch unter PHP 7.4.8):
DevTools failed to load SourceMap: Could not load content for http://localhost/xh175/plugins/swiper/j ... min.js.map: HTTP error: status code 404, net::ERR_HTTP_RESPONSE_CODE_FAILURE
In der swiper.min.js steht am Ende

Code: Select all

//# sourceMappingURL=swiper.min.js.map
„Bevor du den Pfeil der Wahrheit abschießt, tauche die Spitze in Honig!“   👉 Ludwig's XH-Templates for MultiPage & OnePage

Post Reply